TriM Scope Detectors

Both instruments TriM Scope I and TriM Scope II can be equipped with up to 8 NDD PMT detectors for single beam operation and up to 2 CCDs for multi-beam operation. Furthermore, both instruments can operate LaVision BioTec’s FLIM x 16 TCSPC detector.

CCDs and Filter Wheel

Currently LaVision BioTec supports the following CCDs

PCO

PCO.1600 CCD
Pixelfly qe CCD
Sensicam qe CCD
PCO.1200 HS

Andor

iXonEM+ 885 EMCCD
iXonEM+897 back thinned EMCCD

Hamamatsu

Orca-R2 CCD
ImageEM Enhanced C9100-13 back thinned EMCCD
ImageEM 1K C9100-14 EMCCD

For other models please contact LaVision BioTec.

High Speed Filter Wheel

LaVision BioTec provides a fast 8 position filterwheel that is synchronized to the CCD and integrated into the LaVision BioTec ImSpector software package.

8 position filter wheel accomodates 25mm standard filters
Simple load/unload mechanism
<50ms between adjacent positions
Filter positions are controlled via RS232 interface
Simple protocol, driver for most OS available
Adapters for most standards available (c-mount, dovetail, ...)

: CCDs and filter wheel for multi beam operation

NDD PMT detectors

Both TriM Scopes support up to 8 NDD Detectors that can be mounted above the fluorescence arm, close to the objective lens and under the microscopy stage. Between the NDD ports one can place spectral adapters to mount more than one PMT module. The TriM Scope supports up to 8 non descanned PMT detectors.